Speaking of tile adhesives, everyone must be familiar with it, but some people still ask when decorating: Does tile adhesives contain formaldehyde? Let’s take a look at this topic today!
1. What is tile adhesive
Tile adhesive is a new modern decoration material used for pasting ceramic tiles, tiles, floor tiles and other decorative materials.
2. Product classification of tile adhesives
Tile adhesive is a polymer-modified cement-based tile adhesive, which is divided into No. 1 (ordinary type), No. 2 (enhanced type) and No. 3 (larger size ceramic tiles or marble).
1. No. 1 ceramic tile adhesive
Suitable for pasting various floor tiles or small wall tiles on ordinary mortar surfaces.
2. No. 2 ceramic tile adhesive
It has strong adhesion and anti-fall properties, and is suitable for pasting wall tiles and non-mortar surfaces such as wood panels or old finishes that require greater adhesion.
3. No. 3 ceramic tile adhesive
High adhesion, more flexibility, able to withstand the stress caused by thermal expansion and contraction of the bonding layer, suitable for pasting ceramic tiles to gypsum board, fiberboard, plywood or old finishes (ceramic tiles, mosaics, terrazzo), etc. As well as the pasting of various larger size stone slabs. In addition to gray, the tile adhesive is also available with a white appearance and is suitable for light-colored or translucent marble, ceramic tiles and other natural stones.
3. Product characteristics of tile adhesive
High adhesion, no need to soak bricks into wet walls during construction, good flexibility, waterproof, impermeable, crack-resistant, aging resistance, high temperature resistance, freeze-thaw resistance, non-toxic and environmentally friendly, and easy to construct.
4. How to use tile adhesive
1. Wet construction walls and floors. The inside of walls and floors must be kept dry.The surfaces of walls and floors need to be kept smooth, and cement mortar can be used to smooth uneven or rough surfaces.
2. Remove floating ash, oil and other stains from the base layer, otherwise it will affect the adhesion of the tile adhesive.
3. Adjust the adhesive, the water-cement ratio is about 1:4, and stir evenly. The adhesive should be used up within 5 to 6 hours.
4. Apply the mixed adhesive to the back of the tiles to be laid, and press firmly until the tile surface is flat. The tiles laid within 15 minutes can be moved to correct their position.
As for the topic "Does tile adhesive contain formaldehyde" that the editor shared with you today, in fact, from the characteristics of tile adhesive mentioned above, we can understand that tile adhesive is A new type of material is a non-toxic and environmentally friendly product, so there is no such thing as formaldehyde. Okay, the above is what I have shared today, I hope it will be helpful to you! ! !
