When it comes to tile adhesive, everyone seems to know it, but when it comes to what tile adhesive is, everyone doesn’t understand. As a bonding material, tile adhesive is how to use it. ? So our topic today is to learn about how to use tile adhesive! Let’s find out together.
Before we talk about how to use it, it is still necessary for us to understand what tile adhesive is, and then take a look at its scope of use and how to use it, as well as how to save this content.
1. What is tile adhesive
Tile adhesive is also a name for tile adhesive. Tile adhesive is also called ceramic tile adhesive or binder, sticky mud and other names. It is a new material for modern decoration, replacing traditional cement. The adhesive force of yellow sand is several times that of cement mortar and can effectively stick large ceramic tiles and stones to avoid the risk of bricks falling off. Good flexibility to prevent hollowing during production. Mainly used for pasting ceramic tiles, tiles, floor tiles and other decorative materials, widely used in interior and exterior walls, floors, bathrooms, kitchens and other building decoration areas.
2. Scope of application of ceramic tile adhesive
It is suitable for pasting indoor and outdoor ceramic wall and floor tiles and ceramic mosaics. It is also suitable for the waterproof layer of internal and external walls, pools, kitchens and bathrooms, basements, etc. of various buildings. It is used for pasting ceramic tiles on the protective layer of the external insulation system, and the protective layer material needs to be cured to a certain strength. The base surface should be dry, firm, smooth, free of oil, dust, and release agents.
3. How to use ceramic tile adhesive
1. Wet construction of walls and floors. The inside of walls and floors must be kept dry. The surfaces of walls and floors need to be kept smooth. Uneven or rough surfaces can be smoothed with cement mortar.
2. Remove floating ash, oil and other stains from the base layer, otherwise it will affect the adhesion of the tile adhesive.
3. Adjust the adhesive. The water-cement ratio is about 1:4 and stir evenly. The adhesive should be used up within 5 to 6 hours.
4. Apply the mixed adhesive to the back of the tiles to be laid, and press firmly until the tile surface is flat. The tiles laid within 15 minutes can be moved to correct their position.
4. How to store tile adhesive
If the adhesive has not been opened for use, it can be stored according to the instruction manual. It is generally stored in a ventilated, dry, cool and room temperature environment. It can also be stored in a closed container in a cool place away from fire. Store away from light and at low temperature. Do not use metal.Store in a container and prevent moisture from entering, otherwise polymerization and deterioration will occur. Save according to the use period and use before expiration.
The above content is the content of the article that the editor shared with you about how to use tile adhesive. In fact, you can see that the method of use is very simple. If you are not sure, you might as well read it. See if the decoration master does the same thing, and you will know how to use it. Then, the above is the content shared today, I hope it can be helpful to you!
